Construction & Electrical Infrastructure
Exit, emergency & life-safety electrical
Commercial life safety electrical in Richardson and North Dallas: exit signs, emergency egress lighting, fire alarm power and inspection corrections for occupied buildings.
Life safety work is inspection-driven and unforgiving of shortcuts. Exit signs, egress illumination, emergency battery units and reliable power for fire alarm equipment are the systems every fire marshal visit and certificate-of-occupancy review checks — and the ones nobody notices until they fail.
Our scope is the electrical side: installing and repairing exit and emergency lighting, and providing dedicated, properly identified power and disconnecting means for fire alarm equipment, done in occupied buildings without leaving egress unprotected. Fire alarm system design, programming and certification are performed by licensed fire alarm contractors — we coordinate with them and power what they install.
Exit signs, egress illumination and testing
We walk the egress path — corridors, stairs, exit discharge — and check illumination and signage against occupancy requirements. Dark stair landings and exit signs obscured by later tenant improvements are the findings that come up most. Installation and repair covers exit signs, emergency battery units and remote heads; battery-backed units fail quietly, so testing is part of every visit. Renovations change egress paths, and lighting frequently doesn't follow, so we verify coverage still matches the actual path.
- Egress path walkthrough against occupancy requirements
- Exit sign and combination unit installation and repair
- Emergency battery units and remote heads
- Battery and transfer function testing on existing units
- Egress lighting updated after remodels and layout changes
Fire alarm power and trade coordination
Fire alarm control panels need a reliable, properly sized and clearly identified power supply with a disconnecting means where required, so nobody switches it off during unrelated work. We provide those circuits and coordinate with the licensed fire alarm contractor handling design, devices and certification — the same applies to security, access control and sprinkler monitoring trades, where we supply the power and raceway their equipment requires.
- Dedicated, identified circuits for fire alarm equipment
- Coordination with licensed fire alarm contractors
- Power and raceway for security and low-voltage trades
- Elevator recall, door holder and damper power coordination
Inspection corrections and documentation
Correction notices are usually a mix of quick fixes and real scope. We go through the list item by item, separating device replacements from work needing new circuits, and give you a clear picture before it starts. Testing verifies emergency lighting function under simulated power loss and battery performance, confirming illumination actually appears where the path requires it. Results get documented as a record for the inspector and a baseline for future periodic testing.
- Item-by-item review of correction notices
- Simulated power-loss testing of emergency lighting
- Illumination verification along the actual egress path
- Written test and correction documentation
What this typically includes
- Exit signage and emergency egress lighting installation
- Emergency battery units, remote heads and repairs
- Circuits and identified power for fire alarm systems
- Support for low-voltage, security and alarm trades
- Egress lighting updates after remodels
- Inspection correction work and re-verification
- Emergency lighting testing and documentation
Flip the Switch Electric serves Richardson, TX and the surrounding North Dallas area. Tell us what you're working on and we'll give you a straight answer on scope and fit.
Need an electrician who shows up and gets it right?
From a single service call to a full commercial project scope — tell us what's going on and we'll give you a straight answer on what it takes and when we can be there.