Our Work

Recent commercial projects

Selected commercial electrical projects across the North Dallas area, followed by a gallery of real job photos — no stock photography.

Three recent projects that show the scale of work we take on. Project and customer details are limited for privacy — titles are descriptive, not official development names.

Princeton, TX

Princeton Multi-Tenant Retail Shell

Electrical contract value: $189,721

  • Multi-tenant commercial shell and site electrical with an 800A service and a 1,000A tap can installed for the utility connection.
  • Underground conduit from the utility transformer to the service equipment — the utility pulled its conductors to the tap can, and we completed the contractor-side conductors, terminations and distribution.
  • Long wireway arrangement feeding four tenant meter/panel sections plus a house meter and house panel — five meter bases and five panels in total.
  • Pole and site lighting, exterior building lighting, and power for HVAC, water heaters and other building equipment.
  • Basic white-box suite electrical, including required lighting, switching and exit/emergency components.

Northlake, TX

Northlake Multi-Tenant Commercial Shell

Electrical contract value: $144,990

  • Commercial shell and site electrical built around an 800A service with a 1,000A tap can for the utility connection.
  • Underground utility infrastructure from the transformer to the service equipment, with contractor-side conductors, terminations and distribution completed on our side of the demarcation.
  • Multi-meter distribution serving the tenant spaces and house loads, plus power for building equipment.
  • Exterior building lighting and pole/site lighting across the property.
  • Basic white-box electrical in the suites — required lighting, switching and exit/emergency components, ready for future tenant work.

Dallas, TX

Dallas Greyhound & FlixBus Transfer Station

Electrical contract value: $254,475

  • Site electrical and major building power infrastructure for a modular building assembled from approximately eight sections.
  • Underground utility and service infrastructure from the site service point to the building.
  • Commercial metering/transocket equipment and a large service disconnect feeding a 1,000A Square D I-Line distribution panel.
  • HVAC and equipment connections throughout the building.
  • Substantial interior electrical correction and rework after the modular sections were assembled — the part of modular construction nobody puts in the brochure.

From the field

Every photo below is from an actual Flip the Switch Electric job. Captions describe the work rather than naming customers or buildings, and photos are not tied to the specific projects above unless noted.

Commercial building under construction with electrical service equipment installed on the exterior wall

Commercial project

Service and distribution equipment installed on a building exterior.

Interior of a commercial panel with neatly dressed branch circuit conductors and breakers

Panel work

Branch circuit conductors dressed and terminated inside a panel.

Commercial building facade and parking lot lit at night by exterior and site lighting

Building and site lighting

Exterior building and site lighting in service after dark.

Commercial meter, disconnect and feeder installation along a building wall

Meter and disconnect installation

Service equipment and feeders run along a building wall.

Underground electrical conduit stub-ups routed through a building slab before pour

Underground rough-in

Conduit routed and stubbed up before the slab pour.

Interior of a commercial lighting control panel with relays and neatly routed conductors

Lighting control panel

Relays and conductors dressed inside a control panel.

Bank of commercial meters, disconnects and distribution equipment mounted on a building exterior

Service equipment

Meters, disconnects and distribution gear installed and labeled.

Parking lot light pole illuminated at night

Site lighting

Parking lot pole lighting in service at night.

Feeder conductors terminated on a molded case breaker inside commercial equipment

Feeder terminations

Feeder conductors terminated on a molded case breaker.

Generator transfer switch and service disconnect mounted on a building exterior

Transfer switch installation

Transfer equipment and service disconnect mounted at a building.

Underground electrical conduit sweeps set in an open trench at a commercial site

Underground electrical

Conduit sweeps set in an open trench at a commercial site.

Commercial panel and service disconnect mounted on a brick exterior wall with conduit

Panel and disconnect

Panel and service disconnect set on a building exterior with conduit.

Commercial building entrance lit at night by exterior wall lighting

Building lighting

Exterior entry and facade lighting after dark.

Control and surge suppression components wired inside an enclosure with conduit runs above

Control wiring

Control and protection components wired inside an enclosure.

New commercial panel rough-in with feeders landed during construction

Panel rough-in

New panel rough-in with feeders landed during construction.

Multi-tenant commercial meter and disconnect bank with conduit risers

Meter and disconnect bank

Meter and disconnect bank with conduit risers.

Equipment control enclosure mounted to overhead steel in a commercial building

Control enclosure

Control enclosure mounted to overhead structural steel.

Tenant meter and disconnect assembly mounted on a commercial brick wall

Meter and disconnect assembly

Meter and disconnect assembly mounted on a wall.

Flip the Switch Electric service van parked at a commercial job site

On site

Service van staged at a commercial job site.

Looking for something specific? See our full service list.

Need an electrician who shows up and gets it right?

From a single service call to a full commercial project scope — tell us what's going on and we'll give you a straight answer on what it takes and when we can be there.